FMCA3100

  • Solid brushed brass, self-trimming architectural AV floorbox pocket
  • Supports loads in excess of 300 pounds
  • Accepts four (4) Moduline Connector Panels and/or Options
  • Cable exit slots allow for up to sixteen 1/4″ diameter cables
  • Long-term value in a professional floor box package
  • Rough-in box available
    IN STOCK

  • UL and cUL Listed
  • Flexible, easy to install, high capacity floor box pocket assembly
  • Self-trimming cover with beveled edges for installation on top of carpet or hard surface
  • Solid brass cover provides scratch resistance and long-term durability
  • 11 gauge brass cover supports loads in excess of the 300lb UL standard
  • Cable Exit Slots limit “high-heel” trip hazard while allowing for up to sixteen 1/4″ diameter cables
  • Integral basket hides construction rough-in box from view, providing a finished installation
  • Compatible with all ModuLine Connector Insert Panels and/or Options
  • Available provisions for AC Duplex power receptacle, Decora®, AAP®, MAAP® devices, or up to sixteen (16) Neutrik® D type connectors, and more
  • Concrete rated rough-in box available for installation above grade when conduit termination is required or otherwise preferred

Ideal for:

    • Classrooms
    • Houses of worship
    • Conference rooms
    • Courtrooms
    • Performance venues
    • Anywhere connections are needed in the floor.  Design and finish also suitable for in-wall box applications.

Includes: 1ea cover, 2ea gasket, 2ea basket, 1ea center supports bracket, and installation hardware.  Compatible rough-in box, duplex power option, active low-voltage device panel(s), low-voltage connector insert panel(s), labeling, connectors, and accessories also available.

Weight 6 lbs
Cover Dimension (nominal)

14 x 14 in

Basket Dimension (nominal)

10.5 x 10.75 x 2.5D in

ModuLine Panel / Option Capacity

4 (Four)

Finish

Brushed Brass (Solid Brass)

Cover Style

Self-Trimming

Cable Exit

Slot(s)

HandHold Basket Compatible

Yes

Assembly

1ea cover, 2ea gasket, 2ea basket, 1ea center support bracket, and installation hardware.

Warranty

2 Years

Connector Capacity

16ea FlexiConn (or equivalent)

Resources

Cut Sheet
FMCA3000 Series Ordering Guide
TN18 – FMCA3000 Series Installation
Installation CutOut Details
AutoCad Drawing

Connectors
Moduline Connector Panels
Connector Panel Labeling
FMCA3000 Series Rough-in Boxes

A&E Specification

FMCA3100 – Satin Hand Finished Solid Brass w/ Self-trimming Cover, 4ea. .25” x 1” Cable Slot Floor box assembly shall consist of a Cover with hinged door opening, 2ea. Gaskets, 2ea. Baskets and Carrier Bracket. Door / Cover shall be of 11 gauge solid brass (not plated), shall measure 14”L x 14”W, shall be self-trimming, mount virtually flush with the floor or surrounding surface and shall be secured with security socket head screws. Cover shall have radiused corners. Baskets shall be of 16 gauge steel and shall be 10.5”L x 10.75”W x 2.5” deep. Baskets shall mount on manufacturer’s backbox BB3000 or BB3000D. Baskets shall accommodate (4ea) ModuLine Insert Panels or (4ea) MPR (duplex power module) or a combination thereof. ModuLine Insert Panels shall be of 14 gauge steel, shall accommodate __ (specify quantity) connectors, and shall be removable for installation and service without disassembling Cover, Gasket or Baskets. All components shall be UL Listed and conform to all applicable standards of the National Electrical Code. Floor box assembly shall be Mystery Electronics FMCA3100.

You may also like…