RP10

RP10

  • Satin Black, In-floor “rocket pocket” microphone connector and cable storage device
  • Self-ejecting female XLR connector to access attached cable
  • Styled after our self-trimming architectural floorbox pockets
  • Supports loads in excess of 300 pounds
  • Long-term value in a professional floor box package
  • IN STOCK

  • The RP10 floor box “rocket pocket” installs in a raised wooden floor to provide a single microphone input and convenient cable storage in the space below*
  • Easy access sliding panel protects the self-ejecting connector from damage and debris
  • Gravity fed cable return requires no moving parts
  • Solderless termination for female XLR connector and home run wiring
  • Quick and secure installation to wood floor with mounting screws provided
  • No release tab protruding above the floor to get sheared off or damaged
  • Self-trimming cover with beveled edges for installation on top of carpet or hard surface
  • Ceramic coated finish provides scratch resistance for long-term durability
  • 14 gauge satin black cover supports loads in excess of the 300lbs

Ideal in the cavity of a raised wooden floor:

    • Classrooms
    • Houses of worship (stage, pulpit, choir riser)
    • Conference rooms
    • Courtrooms
    • Performance venues
    • Anywhere connections are needed in the floor.

Includes: RP10 assembly, solderless female xlr, terminal block, strain relief, and installation hardware (cable not included)

 

*Important: Unit is intended for raised wooden floor applications only. Unit requires a minimum of six inches depth and .75 cubic foot space below floor to operate (one cubic foot of space is recommended to assure proper operation).  Cable must be shortened for shallower spaces as required.  Cable storage length is determined by available volume and depth of cavity below floor (maximum length of 40 feet recommended).  Not intended for installation in concrete floors without special precautions and preparation due to space requirements for cable (unit should not be installed in concrete floors unless appropriate provisions are made).  See  TechNote TN16 for installation instruction details.

Weight 6 lbs
Connector Capacity

1ea FlexiConn (or equivalent)
Cover Dimension (nominal)

4.6 x 2.85 in
Depth

4D in (plus depth for cable allowance)
Finish

Satin Black
Cover Style

Self-Trimming
Assembly

1ea cover, 1ea gasket, 1ea basket, and installation hardware.
Warranty

2 Years

Resources

Cut Sheet

Related

RPF Series
TC10 Floor Box

A&E Specification

RP10 – In Floor Microphone Cable Storage DeviceRP10 shall measure 4.6”L x 2.85”W x 3.5 “D. Cover of unit shall be constructed of 14 gauge steel, shall have a ceramic plastic finish so as not to create specular light reflections, shall have an integral carpet trim ring having radiused corners and shall be able to support heavy loads (pianos, road cases, etc.). Cover shall be equipped with a sliding panel to protect connector from dirt and debris. Unit shall employ gravity feed for cable storage and shall not rely on mechanical cable storage mechanisms, reels, commutators or springs. Unit shall mount on standard open backed single gang handy box or single gang extension ring only, conforming to N.E.M.A. standards. Unit shall allow termination of installed building wiring without soldering. Unit shall be equipped with an internal strain relief to prevent cable from being pulled out. The In Floor Microphone Cable Storage Device shall be Mystery Electronics RP10.

You may also like…